Maintenance Agreements
Heating and cooling systems have a way of breaking down when the weather is at its worst; on the coldest day of a frigid winter, or during a sizzling summer heat wave; times when your comfort system must work the hardest, and when you need it most.
Regular check-ups will help to maximize the life expectancy of your system; unfortunately, even the best maintenance won't prevent normal wear and tear.
Your investment in our maintenance agreement includes:
Two Performance Tune-Ups Per Year
Having your system checked regularly enables us to keep your unit running as efficiently as possible, which saves you money on your utility bill month after month. These regular check-ups also enables us to catch problems such as loose or burnt wires, and freon leaks, before they lead to a larger problem such as motor failure.
Click here to view our performance tune-up checklist.
24 Hour Priority Service, 365 Days/YR
When you have an emergency, you can rest assured Climate Masters Heating and Cooling...WILL BE THERE! Our commitment to program customers means we will have a technician to your door within 24 hours of calling our office.
10% Off Replacement Parts
Example of savings: if the cost of a blower motor replacement was $400, you would save $40 on the repair.
Labor Warranty
All of our labor services are warranted for 30 days. If you have a problem within 30 days of service, there will be no charge to come back out and diagnose the problem. We stand behind our work.
Energy Saving Coil Cleaning
Dirty coils reduce efficiency and cause your unit to work harder, causing parts to wear out faster, and shorten the life expectancy of your unit. Your unit will cost you more month after month on your utility bill if the coils are not kept clean. Test performed by the EPA explain that as little as 1/10th of a centimeter of dirt or dust on a coil could reduce efficiency by 21%. Since the average homeowner's heating and cooling bill is $1,500 per year, a 21% loss in efficiency means you could be wasting up to $315 each year.
No Trip Charges Or Service Call Charges
With most service companies you can expect to pay a trip charge up to $100.00. Our program customers do not have this added expense when they have a service problem.
Performance Heating Maintenance
- Check voltage and amperage to all motors.
- Lubricate motor bearings where needed.
- Check belt and adjust tension.
- Wash filter or replace (with Customer-Supplied Filter).
- Check electrical lockout circuits.
- Clean and adjust thermostat if needed.
- Clean and adjust all safety controls.
- Clean and adjust pilot assembly.
- Adjust burner for maximum efficiency.
- Check for gas leaks in furnace.
- Check for cracks in furnace heat chamber.
- Check fan controls and adjust if needed.
- Adjust gas pressure regulator.
- Check furnace chimney and flue.
- Check out complete furnace cycle.
Performance Cooling Maintenance
- Wash outside condensing coils, if needed.
- Check voltage and amperage to all motors.
- Install gauges and check operating pressures.
- Check air temperature across evaporator.
- Check for adequate refrigerant charge and possible leaks.
- Check evaporate super heat.
- Lubricate bearings where needed.
- Check belt and adjust tension if needed.
- Wash filters or replace (with Customer –Supplied Filter).
- Check electrical lockout circuits.
- Check starting contactor contacts.
- Check wiring and connections.
- Clean and adjust thermostat if needed.
- Check air temperature across condenser coil.
- Check to make sure condensate drain line is open.
- Clean and adjust safety controls.